Flagpoles come in various configurations which need to be carefully selected according to the location where they will be used, site topography and architecture, mounting position and the aims behind wanting to install a flagpole. This can be quite involved and so the following is a simple guide to the flagpole types that should be considered for such a project.
All examples below are based on modern fibreglass flagpoles with a smooth tapered white gel coat finish and gold colour onion shaped finial. The smooth finish is impervious to weather conditions and can be cleaned with a wet cloth making it easy to maintain a clean appearance.
Ground mounted flagpole with external halyard
This is the classic flagpole configuration for flying traditional landscape style flags. The halyard (rope) runs up and down the flagpole on the outside of the flagpole.You need to be sure you are not in a location where flag trophy hunters can easily remove and steal your flag else you may need an internal halyard type. The flagpole is mounted on a hinged base plate which allows it to be lowered to the ground for maintenance.
Ground mounted flagpole with internal halyard
As with the example above this is the classic flagpole configuration for flying traditional landscape style flags. However, in this type of flagpole the halyard (rope) runs up and down inside the flagpole. This gives protection against unauthorised access because the halyard mechanism for raising and lowering the flag is behind a small door in the side of the flagpole. The door needs a key to open it and so your flying flag is generally safe from trophy hunters. As with the example above the flagpole is usually mounted on a hinged base plate.
Ground mounted flagpole with rotating arm
This type of flagpole is favoured by car showrooms where the flag is flown in portrait style running down the pole. An arm is fitted to the top of the flagpole which rotates to follow the wind direction. The arm holds the flag out on constant display so the design or message is always visible – however light the wind is.
This type of flagpole generally does not have a halyard system and the flagpole needs to be lowered on its hinged base in order to change the flag.
Wall mounted flagpole
Flagpoles are often mounted onto the wall of a building either because there is nowhere to position a ground mounted type or because this type of display will compliment the building and provide a prominent form of advertising or recognition.
Flagpoles fitted in this way either project out from the building at an angle of about 45 degrees or rise vertically up and beyond the roof-line. They are usually supplied with an external halyard system.
Important to note!
Flagpoles come in various heights and grades of strength both of which are essential to the success and safety of the installation. Our service is to provide you with the best advice for selecting the right flagpole for your project. For advice or to discuss installation or maintenance please email the team, call 01245 230 700 or complete ouronline form
